SERVICE PIT JBR 10 WITHOUT A ROLLER SHUTTER – PASSENGER CARS

Our service pits designated for Vehicle Testing Stations for passenger cars are fully in compliance with requirements of the Regulation No. 302/2001 of the Ministry of Transport. The service pits are certified by the Engineering Test Institute and they are in concordance with Governmental Decree No. 176/2008 Sb. (Coll.) and Regulation of the European Parliament and the Council No. 2006/42/ES.
They are in compliance with requirements on health and safety protection. The service pits are in compliance with the Governmental Decree No. 101/2005 Sb. (coll.) , s. 7 (1) to 7 (7) regulating the requirements on service pits.
When offering solutions of the service pit version we put the accent on design, structure and technical equipment of the pit working interior.
 

Technical description

Width 1.3 m
Height 1.5 m
Length 8 m
Pitch between HEB 140 – U 180 sections - 850 mm
Loading capacity – maximal load 10.000 kg
Load from axles 4 x 2.500 kg
Load from lifting jack for a wheel 4 x 1.000 kg
FRAME MATERIAL COMPOSITION
Material quality S 235
Sections U140
Frame metal sheet 3 mm thickness
Total mass with axial cases 2 966 kg
(without grid flooring, width 990 mm)

Basic Equipment of the Service Pit

• Fresh air supply (DN 100) according to ČSN 73 6059 – 3.

• 2 connecting points + distribution

The axial extension is designated for storage of technological equipment for geometry
alignment of wheels. The axial extension of the service pit is produced from steel plates
and sections. Inputs for electrical installation and drainage of liquids are made in the axial
extension of the service pit.

• Lighting – 4 pieces of swivelling lamps
• Plug sockets – 2 pieces 230 V          
• Cables                                 
• Circuit breakers – 2 pieces            
• Installation                           
• Review and electro documentation       
• Switchboard                           

• Stairs with 7 steps, length 1,5 m – 1 piece (one step height 188 mm)
• Ladder – 1 piece (entry side)
• Grid flooring with a sump
• STYRODUR insulation of 20 mm thickness – light blue
• Basic and top coating (finish coat RAL 7035a, finish coat inertol Sika poxitar F- shade 9017)

• Wooden blocks
• Ascendable wooden covering
• Foil covering

• Documentation elaboration – drawings of main assemblies, technical report, electro project, air-conditioning, diagram of connecting points
• Elaboration of construction readiness documentation – it is not designated for building approval
• Cooperation with construction designer
• Service pit loading
• Supervision prior to concrete works within the area of 100 km far from Týniště n. O. (necessary condition for guarantee observance)

Individual stages of construction readiness

1st stage –excavation pit realization
2nd stage – base plate preparation 
3rd stage – placing the service pit on the base plate
4th stage – connecting of the service pit with the service floor